Note: Please consult the technical data sheets for correct product usage and procedures.
Den Braven can not be held liable for products incorrectly used.

Hybriseal 540 is a versatile one component hybrid based sealant with a low modulus for sealing building joints.

Benefits

  • Low modulus
  • Highly elastic
  • EN 15651-1: F-EXT-INT-CC 25LM
  • Free of isocyanates and silicones
  • Excellent adhesion to most building substrates • High resistance to ageing and weathering
  • No bubbling

Applications

Hybriseal 540 is used for expansion and connection joint sealing to precast concrete, brickwork and masonry, perimeter pointing and wall sealing. In general Hybriseal 540 has a good adhesion, also without primer, to concrete, brickwork, painted wood, glass, glazed substrates, aluminium, steel, stainless steel, plastics like polyester and most uPVC.

Directions of Use

A joint with the correct dimensions is able to absorb movements between building materials. The joint depth should always be in the correct relationship of the joint width. A general rule is the ratio of joint depth to the width of the joint with a joint width till 10 mm is 1:1, with a minimum of 5 mm in width and depth. For joints wider than 10 mm, the depth is the width divided by 3 plus 6mm. Applied as an adhesive use it in a ‘ventilating’ way in vertical stripes with 30cm distance in between. The use of two sided adhesive tape, 3mm thick is recommended to support the adhesion during the first 24 hours and to make sure that the thickness of the adhesive is right. For more information see the Technical Bulletin Joint Dimensions in the Knowledge Base on our website www.denbraven.com.

 

Packaging

600ml foil packs, Cartridges of 290ml

Shelf Life

Approx. 12 months